Instructions / Assembly

ManualsBrandsEverbilt ManualsGarden Center4 in. Dryer Duct to Wall Connector

Use and Care Guide

EZDOCK

Easy Clean-Out Connector

Warranty

Safety Information

Item #600-206

Model #EZDOCKRHD

HOMEDEPOT.COM

WARNING: To reduce the risk of fire or injury to persons; follow basic precautions, including the following:

WHAT IS COVERED

All merchandise is warranted to be free from defects in workmanship and material for one year from the date of purchase. This includes normal wear and

performance failure on items. The manufacturer will replace or repair at their option.

WHAT IS NOT COVERED

This warranty only covers normal wear and performance failure. It does not cover any malfunction, performance failure, or defect arising from the misuse,

abuse, neglect, or modification of the product. Any damage or malfunction inflicted upon the product by the user or other external sources, or any failure to

comply with the warnings and instructions, is not covered.

For further assistance visit www.HomeDepot.com.

1) For use with clothes dryers only; do not use for any other purposes.

2) Keep the area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.

3) The interior of the exhaust duct should be cleaned periodically by qualified service personnel.

4) A gas dryer must always be vented outdoors.

SAVE THESE INSTRUCTIONS

NOTICE:

• The clothes dryer shall not be exhausted into a chimney, a wall, a ceiling, or a concealed space of a building.

• Screws which may catch lint shall not be used to secure duct parts together.

• Flexible ducts are to be extended to their full length; any excess duct is to be removed and the duct is to be kept as straight as possible.

• Local building codes shall be followed for installations.

• The maximum length of the duct is 8 ft. No interconnection between ducts is intended.

Installation

1 2 3

TOOLS REQUIRED

Screwdriver

HARDWARE INCLUDED

EZDOCK

Duct Connector

EZDOCK

Wall Connector

QUICK CONNECTION

□

Quick connect EZDOCK® connector

to EZDOCK® wall connector.

SECURING THE

WALL CONNECTOR

□

From inside, insert EZDOCK

wall

connector through hole into vent

hood tailpipe. Secure with sheetrock

anchors and screws (not included).

ATTACHING THE

EZDOCK

CONNECTOR

□

Insert EZDOCK

connector into one

end of duct and secure with clamp.

Summary of content (1 pages)

PAGE 1
Use and Care Guide Item #600-206 Model #EZDOCKRHD EZDOCK® Easy Clean-Out Connector Safety Information WARNING: To reduce the risk of fire or injury to persons; follow basic precautions, including the following: 1) For use with clothes dryers only; do not use for any other purposes. 2) Keep the area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt. 3) The interior of the exhaust duct should be cleaned periodically by qualified service personnel.