Instructions / Assembly

Waterproof Curb Installation Guide

STEP 1

If necessary, cut the waterproof curb to length using a razor blade knife. Apply thin set mortar to the oor and to the edge of the shower base

and walls using a 1/4” x 3/8” square or U-notched trowel.

STEP 2

Press the curb rmly into place. Check the underside of the curb to ensure that full coverage and support is achieved. Note: When setting tile on

the curb, the surface must be sloped towards the shower drain.

MADE IN USA / HECHO EN EE.UU.

DISTRIBUTED BY: / DISTRIBUIDO POR:

HOME DEPOT

2455 PACES FERRY ROAD

ATLANTA, GA 30339

HOMEDEPOT.COM

PAGE 1
Waterproof Curb Installation Guide STEP 1 If necessary, cut the waterproof curb to length using a razor blade knife. Apply thin set mortar to the floor and to the edge of the shower base and walls using a 1/4” x 3/8” square or U-notched trowel. STEP 2 Press the curb firmly into place. Check the underside of the curb to ensure that full coverage and support is achieved. Note: When setting tile on the curb, the surface must be sloped towards the shower drain. MADE IN USA / HECHO EN EE.UU.