Use and Care Manual

Pre-Installation

APPLICATION

This unit is a convertible jet pump designed for pumping water where the water level is less than 70 ft. deep. If the water level to the pump

is deeper than 70 ft., a deep well submersible pump should be selected. A pressure switch pre-set at 30 psi “on”/ 50 psi “off” has been

installed on the pump. The pressure switch will automatically turn the pump on and off based on the system pressure.

TOOLS REQUIRED

Flathead

Screwdriver

Phillips

Screwdriver

Safety goggles

Tape Measure

Thread Tape

PACKAGE CONTENTS

Part Description

A Pump

E Pressure regulator

B Venturi tube (J32P-18/#11)

F Pressure tube

C Nozzle (#02)

G Pressure gauge

D O Ring

SPECIFICATIONS

Power supply 115V/230V, 60 HZ., 20/10 Amp Circuit

Liquid temp. range

32°F to 77°F (0°- 25°C)

Discharge size 1 in. FNPT

Suction size

1-1/4 in. FNPT

Shallow well water level 25 ft.

Deep well water level

70 ft.

Wrench