Item #1005 622 499 #1005 443 146 #1005 443 205 Model #CX1000AMEVB #CX2001AMWGEVB #CX4000AMWGEVB USE AND CARE GUIDE ROOF MOUNTED POWER VENTS Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Everbilt through the purchase of this Power Vent.
Table of Contents Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Intended Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . .
Warranty The manufacturer extends this warranty to the original retail purchaser of its model or, if this unit is purchased and installed by a new home builder, then to the original owner of the home. No subsequent purchaser of the unit or of a home in which it is installed is entitled to any of the benefits of this warranty.
Pre-Installation (continued) PACKAGE CONTENTS A B Part Description A Roof-mount fan with mounting flange B Thermostat Installation 1 2 Positioning the fan □□ Place the fan (A) on top of the shingles, approximately in the center of the roof and close to the ridgeline, but positioned so the unit is only visible on one side of the house. Drilling your reference point □□ With the fan in position, locate a centerline directly between two rafters.
Installation (continued) 3 4 Drawing a reference square □□ Draw a reference square 25-3/8 in. x 25-3/8 in. on the roof using the hole drilled in step 2 as the center. Drawing a circle □□ Within the square, draw a 17 in. diameter circle (1) and remove shingles, nails, and felt from the circle. 1 25-3/8 in. 25-3/8 in. 5 6 Cutting the roof □□ Draw a 14-1/2 in. diameter circle (2) inside the 17 in. circle (1). Ensure that the hole drilled in step 2 is at the center of this circle.
Installation (continued) 7 8 Securing the fan in place □□ When the fan is in place, apply a generous amount of roofing compound between the flange and the shingles approximately 1 in. inside the perimeter of the flange and begin to secure with nails (not included). Installing the thermostat WARNING: When cutting or drilling into a wall or ceiling, do not damage electrical wiring and other hidden utilities.
Operation Please ensure adequate air intake (4.2 – 5.3 sq ft) is available prior to operation. Set the thermostat to the desired attic temperature. The recommended setting is 90˚ - 110˚F. Ensure sufficient power is supplied to the fan. The fan will run as long as the attic temperature remains above the set temperature. Maintenance WARNING: Disconnect the power before you perform any maintenance. □□ Check the electrical connections annually.
Troubleshooting Problem Solution The fan will not turn on. □□ Ensure that there is a proper electrical connection. □□ Check the breaker in the main fuse panel. □□ Adjust the temperature setting on the thermostat. The fan will not turn off. □□ Ensure that there is a proper electrical connection. □□ Raise the temperature setting on the thermostat. There is a loud noise coming from the unit. □□ Ensure that there are no obstructions or debris caught in the housing.
Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
