Instructions / Assembly

CARTRIDGE FOR PFISTER
®
INSTALLATION INSTRUCTIONS
1006964464
Installation Instructions:
1. Turn off water supply to the shower faucet. Once the water supply is shut off, turn the faucet on to release water pressure,
then turn the faucet off.
2. Remove Handle by prying off the Handle Button, removing the Screw and pulling the Handle straight out.
3. Remove Escutcheon by removing Screws, and lifting Escutcheon from wall.
4. Remove Sleeve by unthreading from valve.
5. Remove the old Cartridge by grasping the end of the Cartridge and pulling straight out from valve.
6. Insert new Cartridge into valve, aligning the tab on the Cartridge with the slot in the faucet valve body.
7. Reassemble shower faucet by re-installing the following components:
Install Sleeve and secure to valve by turning clockwise.
Install Escutcheon by placing over valve and securing with Screws.
Install Handle by attaching it to the valve Cartridge, securing with Screw, and pressing Button back in place.
8. Turn on water supply and check for leaks.
Tools Required:
Screwdriver
Adjustable Wrench
Sleeve
(not included)
Handle
(not included)
Screw
(not included)
Button
(not included)
Escutcheon
(not included)
Screws
(not included)
Cartridge