Installation Guide

Installation

INSTALLATION PREPARATION

INSTALLATION

Number per door:

Use this diagram to determine how many

dampers you will need for your door. If your door is wider or

heavier, you will need additional dampers.

3 ft

5.2 ft

Damper

Hinges

1 7/8 in.

(48 mm)

11/16 in.

(17 mm)

Clearance

1 13/16 in.

(30 mm)

Adjustment:

Turn adjustment with phillips head screwdriver to

move the damper in and out. Adjust in for heavier door or out

for lighter doors

- For face frame cabinets (For any door overlay)

- For Frameless style cabinets (Full overlay)

- Non-handed

- Sleek design

Door damper is an independent Soft-Close adapter that

can be used universally in any cabinet construction.

Easily mounts in the corner of the cabinet on the side where

the hinge is located. One screw easily holds the damper in place.

Pilot drill 2.3mm (3/32”), 1/4” deep, for a #6x3/4” pan head

screw (included).

PAGE 1
Installation Number per door: Use this diagram to determine how many dampers you will need for your door. If your door is wider or heavier, you will need additional dampers. 2 INSTALLATION Easily mounts in the corner of the cabinet on the side where the hinge is located. One screw easily holds the damper in place. Pilot drill 2.3mm (3/32”), 1/4” deep, for a #6x3/4” pan head screw (included). 2x Damper 5.2 ft Hinges 1x 3 ft 1 INSTALLATION PREPARATION 1 7/8 in. (48 mm) Clearance 11/16 in.