Item # 1002 782 619 Model # 9236059 USE AND CARE GUIDE 15 IN. UNDERMOUNT RUNNER Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-305-1726 THANK YOU 924 395 500 HOMEDEPOT.
Table of Contents Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Cabinetry Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Drawer Catch Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Frameless Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Face Frame Installation . . . . . . . . . . . . . . . . . . . . . . .
Pre-Installation PLANNING INSTALLATION Ensure all parts listed in the Package Contents section are included and that you have the listed Tools and Materials Required on hand. TOOLS REQUIRED Pencil HARDWARE REQUIRED Drill Measuring Tape Phillips screwdriver #6 x 1/2 in. screws #6 x 3/4 in.
Dimensions Please review these diagrams and measure and mark your installation location before you begin the installation procedures. CABINETRY DIMENSIONS max. 5/8" Drawer side thickness Outside drawer width Inside drawer width 7 mm (9/32") ø 6 mm (1/4") depth 10 mm (3/8") 11 mm (7/16") Cabinet opening height Drawer height Inside cabinet width (ICW) max. 12.7 mm (1/2") 26 mm (1") 37 mm (1-15/32") IW 30 mm (1-3/16") IW=Installation width 13/16 in. (21 mm) Drawer side thickness 1/2 in.
Dimensions (continued) DRAWER CATCH DIMENSIONS 30 mm (1-3/16") ø 3.5 x 20 mm #6 x 3/4" 80 mm (3-9/16") 26 mm (1-1/32") 10 mm 3/8" 48 mm (1-7/8") 30 mm (1-3/16") ≤ 30° Frameless Installation 1 Installing the drawer slides Ƒ Attach the left and right drawer slides (A and B) to the inside of the cabinet using #6 x 1/2 in. screws. Ensure you leave a 1/16 in. (2 mm) space between the face of the cabinet and the start of the drawer slides. Ƒ A #6x1/2" B 2 mm 1/16" 5 HOMEDEPOT.
Face Frame Installation 1 Preparing the slides A /B Ƒ Slide the notch on the left and right drawer slides (A and B) forward, as shown. 2 3 Installing the drawer slides Securing the drawer slides to the cabinet Ƒ Attach the face frame brackets (D) to the back of the cabinet using #6 x 1/2 in. screws. Ƒ Secure the front of the drawer slides (A and B) onto the cabinet using #6 x 1/2 in. screws. Ƒ Slide the left and right drawer slides (A and B) onto the face frame brackets (D).
Drawer Installation and Removal 1 30 mm (1-3/16") Installing the drawer catches Ƒ Install each drawer catch (C) into the two front corners of the drawer using #6 x 3/4 in. screws. If you need to install the screws at an angle, do not angle the screws more than 30°. 2 30 mm (1-3/16") C ≤ 30° Installing the drawer Ƒ Insert the drawer onto the glides inside the cabinet and push inside until the drawer catches click.
Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-305-1726 HOMEDEPOT.COM Retain this manual for future use.