Instructions / Assembly

Use and Care Guide
Closet Rod Support Bracket (2PK)- Chrome-Add-On
Item # 1007-782-452
Model # 90682
NOTE: Closet rod brackets need to be installed BEFORE any decorative shelf covers are installed on shelf.
Fig. 1
K K
Fig. 2 Fig. 3
Count 6 rods or more from one side of the wire shelf and install closet rod brackets as shown. Maximum spacing
between closet rod brackets is 18 in. for this system (see Fig. 1).
Put the closet rod support bracket (K) at an angle as shown and place the back part onto the horizontal rod (B) (see Fig.
2).
Pull down the closet rod support bracket (K) and snap onto the shelf's front rod (C) (see Fig. 2 and Fig. 3).
K
6 rods or more
Max 18 in.
Closet Rod Support Bracket x 2
K
Installation
12
3
Rod C
Rod B
Warranty
This product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase. If this product is defective, call
1-800-305-1726 or return the product to the store from which it was purchased for a replacement. Guarantee does not include normal wear and tear.
HOMEDEPOT.com
Please contact 1-800-305-1726
for further assistance.
WARNING: This product can expose you to chemicals, including lead, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to www.P65Wamings.ca.gov

Summary of content (1 pages)