User Manual

Installation
24 in. White / Gray / Birch Décor Shelf Cover (2-Pack)
Item #1006-841-112 / 1006-841-104 / 1006-841-024
Model #90442 / 90444 / 90446
Warranty
1
2
PUT ON ENDCAPS (B) AS SHOWN BELOW (SINGLE OR CONNECTED).
This product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase. If this product is defective, call
1-800-305-1726 or return the product to the store from which it was purchased for a replacement. Guarantee does not include normal wear and tear.
PARTS LIST
A
B
24 in. Décor Shelf Cover
Décor Shelf Cover Endcap Set (both ends)
2
2
Part QuantityDescription
A
B (Left)
B (Right)
B (Left)
B (Right)
A
B (Left)
B (Right)
A
REMOVE PROTECTIVE FILM (TWO SIDES) BEFORE INSTALLATION.
No endcap here
Single Connected
HOMEDEPOT.com
Please contact 1-800-305-1726
for further assistance.
WARNING: This product can expose you to chemicals, including lead, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm.
For more information go to www.P65Wamings.ca.gov
3
PLACE A DÉCOR SHELF COVER (A) ONTO WIRE SHELF AND PUSH ALL THE WAY TO THE REAR SO THAT THE FRONT LIP OF
THE COVER IS FLUSH AGAINST THE FRONT LIP OF THE WIRE SHELF.
SNAP DOWN REAR OF THE DÉCOR SHELF COVER (A) OVER BACK OF THE BRACKET AT EACH INTERSECTION WITH VERTICAL
RAILS.
A
A
2
1
B (Left)
B (Left)
Assembly and Installation Guide