Instructions / Assembly

Installation Instructions:
1. Remove the old handle from the cartridge or stem. (Use handle puller if needed.)
2. Pry the button off of the top of the new handle.
Using a screwdriver, remove the screw to release the adapter.
3. Place the adapter on the stem or cartridge, and tighten both sides with a screwdriver.
4. Place the new handle over the adapter.
Using a screwdriver, secure the handle by installing the screw at the top of the handle.
5. Replace the handle button.
FIT MOST HANDLE
INSTALLATION INSTRUCTIONS
1006965148
Tools Required:
Screwdriver
Screw
Handle
Button
Adapter
Stem
(not included)