Specification

Distributed by MIDWEST AIR TECHNOLOGIES, INC.

6700 WILDLIFE WAY, LONG GROVE, IL 60047

TEL: 847.821.9630 • FAX: 847.478.9697 • www.mat-holdings.com

MIDWEST AIR TECHNOLOGIES, INC.

ANSI: America National Standard Institute

DASMA: Door & Access Systems

Manufacturer’s Association, International

EVERBILT: STANDARD 1-7/8 IN ROLLER

Part No. 5020A21 SKU No. 528 035

MATERIAL

Steel

USAGE GUIDELINES

The 1-7/8˝ Roller is a replacement roller assembly for residential sectional garage doors. It consists of a combination

wheel and axle that will be used to guide the garage door through the track system.

TRADE SIZE (Sell Pack)

3.7˝ x 9.6˝

PRODUCT SIZE

1-7/8˝ Roller, 4-3/8˝ Stem,

7/16˝ Shaft

FINISH

Zinc Plated

The bearings are lubricated at the factory

The roller diameter is 1-7/8˝, the stem

diameter is 7/16˝

The stem is 4-3/8˝ long

Durability: meets a minimum life cycle

rating of 12,000. One cycle consists of the

door opening fully and then returning to the

closed position. (ANSI/DASMA 102)

PAGE 1
EVERBILT: STANDARD 1-7/8 IN ROLLER Part No. 5020A21 SKU No. 528 035  The bearings are lubricated at the factory  The roller diameter is 1-7/8˝, the stem diameter is 7/16˝  The stem is 4-3/8˝ long  Durability: meets a minimum life cycle rating of 12,000. One cycle consists of the door opening fully and then returning to the closed position. (ANSI/DASMA 102) MATERIAL FINISH PRODUCT SIZE TRADE SIZE (Sell Pack) Steel Zinc Plated 1-7/8˝ Roller, 4-3/8˝ Stem, 7/16˝ Shaft 3.7˝ x 9.