Specification

54
Product #281X
Flat Head Ribbed Screws, LOX
®
Drive (2 OF 2)
EXTERIOR WOOD
PRODUCT SIZES AND ORDERING INFORMATION
Catalog No. Gauge/Length Length Metric Quantity Per Carton Weight Per Carton
W8150RG #8x1-1/2” 38 mm 2450 16.00(lbs)
W8175RG #8x1-3/4” 45 mm 2450 18.00(lbs)
W8200RG #8x2” 51 mm 1750 15.00(lbs)
8250JBWD #8x2-1/2” 63 mm 2.5 M 23.00(lbs)
W9250RG #9x2-1/2” 63 mm 1750 21.00(lbs)
W9300RG #9x3” 76 mm 1750 25.00(lbs)
W10350RG #10x3-1/2” 89 mm 700 15.00(lbs)
W10400RG #10x4” 102 mm 700 16.00(lbs)
*1lb Box and Deck Pack screw packaging option available on selected items.
STANDARD CORROSION TEST RESULTS
Finish Test Standard/Protocol Results
GRABBERGARD Salt Spray ASTM B117 1,000 hours,
Results no red rust
GRABBERGARD Kesternich DIN 50018, 2.0L 15 cycles,
Results no red rust
GRABBERGARD
®
and GRABBER Stainless Wood screws are produced
in an ISO 9001 approved and certified environment, and meet or
exceed American Society for Testing and Materials Standards ASTM
Designation B117 (1000hrs) for Corrosion Resistance and D1761 for
Mechanical Fasteners for Wood. GRABBER
®
, STREAKER
®
, DRIVALL
®
,
LOX
®
, GRABBERGARD
®
and SCAVENGER
®
are registered names or
trademarks by John Wagner Associates, Inc.
PRODUCT DIMENSIONS (MILLIMETERS)
Gauge B Head Recess W Gauging d Shank d1 Minor d2 Major TPI
Dia Depth Width Dia Dia Dia
#6 8.00 0.50 #2 2.68 2.25 3.75 8
8.50 0.80 2.72 2.45 3.95
#7 8.00 0.50 #2 2.93 2.50 4.05 8
8.50 0.80 2.97 2.80 4.30
#8 8.00 0.50 #2 3.18 2.80 4.30 8
8.50 0.80 3.22 3.10 4.60
#10 8.50 0.50 #2 3.78 3.20 5.00 8
8.90 0.80 3.82 3.50 5.30
PULL-OUT TEST DATA
Gauge 2x2 2x4 1x3 1” Plywood 3/4”
Douglas Fir Redwood Clear Pine Particleboard
#8 373 377 358 265 227
#9 380 391 375 280 263
#10 404 402 396 314 319
**GRABBER
®
fasteners are not categorized as structural bolts. The figures listed above
are ultimate average values achieved under independent laboratory conditions, and apply
to GRABBER
®
Line fasteners only. An appropriate safety factor must be determined by a
qualified professional for design purposes.
B
W
d1 d2
All GRABBER® screw products are manufactured in facilities that are ISO
9002 and ISO 14001 certified and approved. The fasteners comply with ASME
B18.6.1, as referenced in ICC ER report ER-5280, are approved for use in
structures governed by the International Building Code 2006, 2009, 2012,
International Residential Building Code 2006, 2009, and 2012. ©2012
GRABBER Construction Products, Inc. GRABBER®, STREAKER®, DRIVALL®,
LOX®, GRABBERGARD® and SCAVENGER® are registered trademarks of
Grabber Construction Products, Inc.