Specification

77
Product #220
Wafer Head STREAKER
®
(2 OF 2)
PRODUCT SIZES AND ORDERING INFORMATION
Catalog No. Gauge/Length Length Metric Quantity Per Carton Weight Per Carton
32RG #8x1” 25mm 5 M 26.00(lbs)
32Z #8x1” 25 mm 5 M 26.00(lbs)
3138Z #8x1-1/2” 38 mm 3 M 21.00(lbs)
33RG #8x1-1/4” 32 mm 5 M 31.00(lbs)
33Z #8x1-1/4” 32 mm 5 M 31.00(lbs)
3151Z #8x2” 51 mm 2.5 M 22.00(lbs)
3163Z #8x2-1/2” 63 mm 2.5 M 26.00(lbs)
3176Z #8x3” 76 mm 1 M 12.00(lbs)
31RG #8x9/16” 14 mm 10 M 37.00(lbs)
31Z #8x9/16” 14 mm 10 M 37.00(lbs)
*1lb Box and 5lb Box screw packaging option available on selected items.
STANDARD CORROSION TEST RESULTS
Finish Test Standard/Protocol Results
Clear Zinc Salt Spray ASTM B117 24 hours,
Results No Red Rust
GRABBERGARD Salt Spray ASTM B117 1,000 hours,
Results no red rust
GRABBERGARD Kesternich DIN 50018, 2.0L 15 cycles,
Results no red rust
PRODUCT DIMENSIONS (MILLIMETERS)
Gauge B Head Recess W Gauging d Shank d1 Minor d2 Major TPI
Dia Depth Width Dia Dia Dia
#8 10.80 2.00 #2 3.18 2.80 3.20 15
11.40 2.40 3.22 3.00 3.40
SHEET STEEL GAUGES
Gauge No. Decimal Equivalent Millimeter Equivalent
20 0.0396” 1 mm
25 0.0188” .6 mm
PULL-OUT TEST DATA
Screw Gauge Metal Gauge Tension (lbs.) Shear (lbs.)
#8 20 342 785
25 145 325
**GRABBER fasteners are not categorized as structural bolts. The
figures listed above are ultimate average values achieved under
independent laboratory conditions, and apply to GRABBER Line
fasteners only. An appropriate safety factor must be determined
by a qualified professional for design purposes.
Light Gauge Metal (20-25)
d1d d2
W
B
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified
and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271,
are approved for use in structures governed by the International Building Code 2006, 2009, 2012,
International Residential Building Code 2006, 2009, and 2012.