Specification

92
PRODUCT DIMENSIONS (MILLIMETERS)
Gauge B Head Recess W Gauging d Shank d1 Minor d2 Major TPI
Dia Depth Width Dia Dia Dia
#6 8.00 2.64 #2 2.78 2.40 3.40 20
8.50 3.00 2.82 2.60 3.60
#7 8.00 2.64 #2 3.03 2.45 3.75 19
8.50 3.00 3.07 2.65 3.95
#8 8.00 2.64 #2 3.28 2.85 4.05 18
8.50 3.00 3.32 3.05 4.25
PULL-OUT TEST DATA
Screw Gauge Metal Gauge Tension (lbs.) Shear (lbs.)
#6 14 906 1145
16 265 792
18 287 797
20 237 557
#7 14 708 1479
16 454 1148
18 361 1140
20 213 777
#8 14 450 1012
16 442 955
18 340 1045
20 265 680
#10 14 722 0
16 0 698
18 0 684
20 0 456
22 0 390
**GRABBER
®
fasteners are not categorized as structural bolts. The
figures listed above are ultimate average values achieved under
independent laboratory conditions, and apply to GRABBER Line fasteners
only. An appropriate safety factor must be determined by a qualified
professional for design purposes.
Product #240S
Scavenger
®
Head DRIVALL
®
Self Drilling (3 OF 3)
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001
certified and approved. The fasteners comply with ASTM C954, as referenced in ICCES report ER-5280,
are approved for use in structures governed by the International Building Code 2006, 2009, 2012,
International Residential Building Code 2006, 2009, and 2012.
Heavy Gauge Metal (20ga or thicker)