Specification

139
Product #228
GRABBER
®
Cement Board Screws Sharp Point (2 OF 2)
PRODUCT SIZES AND ORDERING INFORMATION
Catalog No. Gauge/Length Length Metric Quantity Per Carton Weight Per Carton
BGCB8125HL #8x1-1/4” 32 mm 5 M 37.00(lbs)
BGCB8158HL #8x1-5/8” 41 mm 4 M 31.00(lbs)
BGCB8225HL #8x2-1/4” 57 mm 2 M 31.00(lbs)
*1lb Box, 5lb Box and Collated screw packaging option available on selected items
Cement Board
PRODUCT DIMENSIONS (MILLIMETERS)
Gauge B Head Recess W Gauging d Shank d1 Minor d2 Major TPI
Dia Depth Width Dia Dia Dia
#8 8.18 6.20 3.18 2.80 4.00 15
8.84 6.35 3.22 3.00 4.20
Pull-out and Shear Test Data**
#8 25ga 22ga 20ga 2x2 Fir 2x4 RW 1x3 Pine 3/4” Pine
AVG. 209lbs 318lbs 434lbs 187lbs 403lbs 507lbs 476lbs
**GRABBER fasteners are not categorized as structural bolts. The figures listed above are
ultimate average values achieved under independent laboratory conditions, and apply
to GRABBER Line fasteners only. An appropriate safety factor must be determined by a
qualified professional for design purposes.
STANDARD CORROSION TEST RESULTS
Finish Test Standard/Protocol Results
GRABBERGARD
®
Salt Spray ASTM B117 1,000 hours,
Results no red rust
GRABBERGARD
®
Kesternich DIN 50018, 2.0L 15 cycles,
Results no red rust
d1 d2
W
B
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified
and approved. The fasteners comply with ASTM C1513, as referenced in ICC ESR report ESR-1271,
are approved for use in structures governed by the International Building Code 2006, 2009, 2012,
International Residential Building Code 2006, 2009, and 2012.