Specification

138
Cement Board
Product #228
GRABBER
®
Cement Board Screws Sharp Point (1 OF 2)
APPLICATIONS
 Cement board to Wood
 High density exterior sheathing
 Tile-backers to wood
 Cement Board to Steel, 20 to 25 gauge
SPECIFICATIONS
 Gauge - #8
 Lengths – 1-1/4” – 2-1/4”
 Head Type – Thin Wafer with Nibs
 Recess Type - #2 Phillips
 Thread Type – Single Lead, Alternating High-Low Thread
 Finish – GRABBERGARD
 GRABBER
®
screws are manufactured in an ISO 9002 and ISO 14001
certified and approved factory, and are approved by ICC ESR report ESR-1271.
Head diameter - .40 inch
PRODUCT FEATURES
 .40 inch diameter head
 Alternating High/Low Threads for wood or metal
 Exterior Grade Corrosion Resistance 1000 hrs per ASTM B117
 Wafer head with nibs to facilitate seating and minimize strip out
#2 Phillips recess drive
INSTALLATION GUIDELINES
 Use a standard screwgun with a depth-sensitive nose piece. Suggested
screwgun specification for optimal performance – 4 amps minimum and
2500 RPM.
 Install with head flush with board, no need to counter sink.
 Overdriving may result in failure of the fastener or stripout of the
work surface.
Wafer head with nibs designed for use with cement board and high density exterior sheathing.
Finish - GRABBERGARD