User's Manual

2348 Walsh Avenue
Santa Clara, CA 95051
[e-mail]
www.everactive.com
- pip3 install --upgrade -i http://python-registry.psikick.com --trusted-host
python-registry.psikick.com wakeup_device
Open a command line prompt to run commands to configure Boomerang
Run wu_fcc --h to see configuration options
Figure 2: List of configuration options
Run the script starting with wu_fcc followed by the commands to program the transceiver.
The wakeup.py script can operate the following functions:
• Vary transmit output power
• Hop across all channels
• Sweep all channels
• Specify channels
• Receive packets
Example: See configuration options: wu_fcc --h
Example: Send a wake-up message: wu_fcc --search --wu --power 30
The LED on the wake-up dongle will light up when a transmission is successfully sent. See image below:
Figure 3: CN Dongle operating (as seen via LED)