Technical data

ManualsBrandsEver ManualsConsumer electronicsSINLINE PRO 10000

SINLINE PRO 10 000

GENERAL DATA

PARAMETERS

SINLINE PRO 10 000

Output power

Topology

10 kVA

8 kW

>98 %>98 %

IP20

Separate room with low contamination level

Forced, internal fans

Total efficiency for Pmax AC/AC

Protection level

Work environment

Working temperature

Storage temperature

Relative humidity when working

Relative humidity during storage

Input voltage

Output voltage (RMS)

Output voltage waveform

Output voltage frequency

Input voltage frequency

Input voltage range

Switching thresholds: mains-ups

Switching thresholds: Ups-mains

Output voltage filtering

Output voltage distortion THDu

Crest factor CF

Short circuit current

Output voltage waveform

Output voltage filtering

Altitude above sea level

Cooling

÷40 C

< 95 %

< 1000 m

~150÷280 V (~165÷280 V)± 2 %

~172,5÷252 V (~190÷252 V)± 2 %

~230 V ± 2 %

< 5 % for Pmax (line)

2:1

>4:I

Sine

~150 V/~290 V (~165 V/~280 V) ± 2 %

~155 V/~285 V (~170 V/~275 V) ± 2 %

Synchronous / 50Hz ± 0.2 Hz

The same as the input

RFI/EMI interference filter, varistor muffler

45 ÷ 55 Hz ± 1 Hz

POWER NETWORK MODE

BATTERY MODE

TECHNICAL DATA

Notes:

For standard operation, the load that is applied to the output must not exceed 80% of the value in the table.

The power margin is necessary to ensure the continuous work of the connected devices in the case of instantaneous surges of the load.

Constant exposure of the battery module to temperatures of +25°C reduces the battery life.

The permitted maximum load of the power supply unit decreases with the height above the sea level above the limit specified above.

Note: The manufacturer reserves the right to modify the above parameters without prior notice.