Owners Manual

TimeFactor User Guide Overview
8
Overview
The Basics
There are a few basic concepts that you’ll have to grasp to use TimeFactor successfully. If you
read nothing else, please read this section.
The Effects
There are ten distinct delay types which we call “Effects.” Select an Effect by turning the
Encoder knob. Only one Effect can be active at a time.
Controlling the Effects
Each Effect has parameters that can be modified by turning the ten Control Knobs. The
control knobs allow you to set delay time, feedback, mix levels and adjust other parameters
that change the sound of each Effect. Also, certain aspects of the Effect can be controlled by
the Footswitches.
Using the Footswitches
The Footswitches can be used in two ways- Play Mode and Bank Mode.
In Play Mode, the Footswitches are used to control certain aspects of the Effects, like Tap
Tempo and Infinite Repeat. In Bank Mode, the Footswitches are used to instantly recall saved
versions of the Effects.
Before we describe the Footswitch modes, we’ll need to define some terms.