Owners Manual

TimeFactor User Guide System Menu Tree

[PDLOCK] – Enable Expression Pedal Lock (ON, OFF)

Press the Encoder to select. Turn the Encoder to set Pedal Lock ON or OFF.

With Pedal Lock OFF, the Expression Pedal can be programmed live at any time. With Pedal

Lock ON, Expression Pedal programming is disabled and all Expression Pedal settings are

locked.

The Pedal Lock feature is a good way to ensure that Expression Pedal settings do not change.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[PDLCAL] – Auto-Calibrate Expression Pedal (ON, OFF)

Press the Encoder to select. Turn the Encoder to set Auto-Calibration ON or OFF. See p.35 for

more info on Pedal Calibration.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[SER#] – Serial Number

Press the Encoder to display your TimeFactor’s unique serial number. You’ll need to know this

number to request support and to download software updates.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[SW VER] - Software Version

Press the Encoder to display your TimeFactor’s software version.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

H9 Control

The versions of TimeFactor starting at version 5.0.0 make it possible to use TimeFactor with

MACOSX and Windows versions of Eventide’s H9 Control application. This application can be

used to manage factory and user Presets, create multiple Preset lists, and adjust the system

settings (although it cannot be used to purchase new algorithms for TimeFactor). Extensive

information on downloading, installing and using H9 Control can be found at:

www.eventide.com/AudioDivision/Support/Stompboxes/h9.aspx.

In order to begin using H9 Control with your TimeFactor pedal, connect it to the computer

via USB cable and launch the application. H9 Control will then ask for your Eventide user

name to ensure that the device is registered to you (if you have not already registered your

pedal or created an Eventide account, please do so at eventide.com). Once it has verified the

device’s registration, you can begin using H9 Control with your TimeFactor pedal.