Owners Manual

TimeFactor User Guide System Menu Tree

[CLK OUT] – MIDI Output Clock Enable (ON, OFF)

Press the Encoder to select. Turn Encoder to set MIDI Output Clock ON or OFF.

If ON, TimeFactor can now be used as a MIDI Clock source.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to top level System menu.

[CLK FLT] – MIDI Clock Filter Enable (ON, OFF)

Press the Encoder to select. Turn Encoder to set MIDI Clock Filter ON or OFF.

If ON, TimeFactor can be used with an unstable MIDI Clock source.

Press the Middle Footswitch once to back-up one level to MIDI menu.

Press the Middle Footswitch twice to go to top level System menu.

[GLOBAL] - Global Functions

After entering System mode, turn the Encoder to select [GLOBAL], then press the Encoder to

enter the Global functions settings mode. Turn the Encoder to scroll through the following

Global functions. Press the Encoder to select and set:

[MIX] – Enable Global Mix (ON, OFF)

If Mix is ON, values are still stored with Presets, but not used. Instead, the current mix value is

used for all Presets. If Mix is OFF, the value at the time the Preset was saved is used.

Press the Middle Footswitch once to back-up one level to GLOBAL menu.

Press the Middle Footswitch twice to go to top level System menu.

[TEMPO] – Enable Global Tempo (ON, OFF)

If Tempo is ON, values are still stored with Presets, but not used. Instead, the current tempo

value is used for all Presets. If Tempo is OFF, the value at the time the Preset was saved is

used.

Press the Middle Footswitch once to back-up one level to GLOBAL menu.

Press the Middle Footswitch twice to go to top level System menu.

[ISW] – Enable Global Input Swell (ON, OFF)

Press the Encoder to select. Turn the Knob to set Global Input Swell ON or OFF. If Global

Input Swell is ON, Input Swell will always be active, whether or not it was enabled in the

current preset.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.

[OSW] – Enable Global Output Swell (ON, OFF)

Press the Encoder to select. Turn the Knob to set Global Output Swell ON or OFF. If Global

Output Swell is ON, Output Swell will always be active, whether or not it was enabled in the

current preset.

Press the Middle Footswitch once to back-up one level to UTILITY menu.

Press the Middle Footswitch twice to go to top level System menu.