Owners Manual

TimeFactor User Guide System Menu Tree

To assign the switches, first select the TimeFactor parameter or function (the destination) that

you want to externally control (Mix for example) and then select the Aux Switch that you

want to control it with (the source).

To Setup Parameter Destinations

Turn the Encoder knob to select an external control destination. Destinations include the

TimeFactor parameters and functions that can be controlled by one of the Aux Switches. The

choices are:

BYP – Toggle Bypass/Active. (Bypass type selected in BYPASS)

BK + – Increment Bank number switch function.

BK - – Decrement Bank number switch function.

TAP – Tap tempo switch function.

RPT – Repeat function.

P/B – Toggle between Play and Bank Mode.

REC – Looper Record

PLY – Looper Play

STP – Looper Stop

MT – Looper Empty

DIR – Looper Direction

OCT – Looper Octave

KB0…9 – Because of the limited space in the Billboard display, the Parameter

Control Knob names cannot be meaningfully displayed. Instead, for display

purposes, we’ve numbered the knobs from 0 to 9 shown in the image below.

FS1…3 – Alternate Mode (AUX Switches act as Play Switches when the Stompbox

is in Bank Mode, and Bank Switches when the Stompbox is in Play Mode)

PDL – Use AUX Switch to access full value of Preset’s Expression Pedal assignment

while the switch is held

The notion of using an On/Off control source like an Aux Switch to control a variable

parameter bears some explanation. Consider a variable parameter like Dly Mix. You may want

to be able to use a remote switch to instantly change from 100% Delay A to 100% Delay B.