User Guide

PitchFactor User Guide The Basics
10
Overview
The Basics
There are a few basic concepts that you’ll have to grasp to use PitchFactor successfully. If you
read nothing else, please read this section.
The Effects
There are ten distinct effect types which we call “Effects.” Select an Effect by turning the
Encoder knob. Only one Effect can be active at a time.
Controlling the Effects
Each Effect has parameters that can be modified by turning the ten Control Knobs. The
control knobs allow you to set wet/dry mix, pitch ratios, delay, feedback, modulation and to
adjust other parameters that change the sound of each Effect. Also, certain aspects of the
Effect can be controlled by the Footswitches.
Using the Footswitches
The Footswitches can be used in two ways - Play Mode and Bank Mode.
In Play Mode, the Footswitches are used to control certain aspects of the Effects, like Tap
Tempo, Learn and Flex. In Bank Mode, the Footswitches are used to instantly recall saved
versions of the Effects.