User Guide

TimeFactor User Guide System Menu Tree
48
Restoring Factory Settings/Software Updates
Restoring Factory System Settings
To restore System settings, power up ModFactor while simultaneously pressing the Right
Footswitch and the Encoder until [CLEAR SETUP] is displayed.
Restoring Factory Effects Presets and System Settings
CAUTION: This function will overwrite any Presets that you have saved.
To restore Factory Presets and all System settings, power up ModFactor while simultaneously
pressing the Middle Footswitch and the Encoder until [INITIALIZING] is displayed.
Software Updates
ModFactor’s software can be upgraded over USB. Information on software updating can be
found at www.eventide.com.
H9 Control
The versions of ModFactor starting at version 5.0.0 make it possible to use ModFactor with
MACOSX and Windows versions of Eventide’s H9 Control application. This application can be
used to manage factory and user Presets, create multiple Preset lists, and adjust the system
settings (although it cannot be used to purchase new algorithms for ModFactor). Extensive
information on downloading, installing and using H9 Control can be found at:
www.eventide.com/AudioDivision/Support/Stompboxes/h9.aspx.
In order to begin using H9 Control with your ModFactor pedal, connect it to the computer via
USB cable and launch the application. H9 Control will then ask for your Eventide user name
to ensure that the device is registered to you (if you have not already registered your pedal or
created an Eventide account, please do so at eventide.com). Once it has verified the device’s
registration, you can begin using H9 Control with your ModFactor pedal.