User Guide

ModFactor User Guide Control Knobs
24
Shape
Selects the shape (or source) of the modulation. The choices are:
SINE, TRIANGL(E), PEAK, RANDOM, SQUARE, RAMP, SQUARE, SMP/HLD, ENVELOP or ADSR.
In addition, the Expression Pedal (EXP PDL) can be chosen as a source. When EXP PDL is
chosen, the current preset’s pedal mapping is ignored.
Xnob
The Xnob control is effect type dependent and works as follows:
EFFECT - TYPE
XNOB Function
CHORUS – LIQUID
Feedback
CHORUS – ORGANIC
Manual Delay Offset [MDO]
CHORUS – SHIMMER
Feedback
PHASER – NEGATIVE/POSITIVE/FEEDBACK
Filter Stages
PHASER – BIPHASE
Forward/Reverse
Q-WAH
Base Frequency
FLANGER
Manual Delay Offset [MDO]
MODFILTER
Width (STEREO ONLY)
ROTARY
Tone
TREMELOPAN
Width (STEREO ONLY)
VIBRATO – MODERN/VINTAGE
Width (STEREO ONLY)
VIBRATO – RETRO
Filter Stages
UNDULATOR – PITCH
Spread
UNDULATOR – FEEDBCK
Feedback
RINGMOD
Tone
Modulating the Modulation
The bottom row knobs are used to modulate the primary modulation.
D-Mod
Controls the amount of modulation of the Depth parameter. Analogous to AM (Amplitude
Modulation). Full counter-clockwise is OFF.
S-Mod
Controls the amount of modulation of the Speed parameter. Analogous to FM (Frequency
Modulation). Full counter-clockwise is OFF.
Mod Rate
Sets the secondary LFO rate – determines how fast the D-Mod and S-Mod “wiggle” their
targets. Ranges from 1/8 to 8X the Speed value.
Note: If Envelope or ADSR is selected as the Mod Source, the modulation is driven by the
amplitude of the audio input and the S-Mod control becomes a Sensitivity control.
Mod Source
Selects the secondary LFO modulation source. The choices are:
SINE, TRIANGL(E), PEAK, RANDOM, RAMP, SQUARE, SMP/HLD, ENVELOP or ADSR.
In addition, the Expression Pedal (EXP PDL) can be chosen as a source. When EXP PDL is
chosen, the current preset’s pedal mapping is ignored.