Algorithm Manual

Table Of Contents
H9000 Algorithms Manual, Release 1.2.1[5]
#6214 Phase Test
This preset drives all four outputs with an oscillator, and then compares the (assumed looped-back) inputs
against each other. This will detect any inter-channel phase or gain errors, as well as any clicks. Due to the
precision of the comparison, it is unlikely to be useful with analog signals.
Eect Type Suggested Use Max Sample Rate In/Out
{F} [F] 96kHz 4, 4
#6216 Oscillator 1k 0vu
General-purpose oscillator. On loading it is set to a 1 KHz sine wave. Lfo (fm) allows addition of an oset
and modulation. Output will clipabove +12dB. Aliasing will be audible on triangular and square waves at
higher frequencies.
Eect Type Suggested Use Max Sample Rate In/Out
{F} [S] 96kHz 2, 4
#6217 20>20 Audio Sweep
A general-purpose oscillator. On loading it is set to a 20>20 kHz sweeping sine wave. The output will clip
above +12dB. Aliasing will be audible on triangular and square waves at higher frequencies.
Eect Type Suggested Use Max Sample Rate In/Out
{F} [M] 96kHz 2, 4
#6214 Phase Test 279