User Manual

H9 User Guide System Mode
44
[SOURCE] – Select Source Instrument (GUITAR, BASS, SYN.LD, SYN.BAS)
Press the Encoder to select. Turn Encoder to select the type of instrument
(SYN.LD=Synth Lead, SYN.BAS=Synth Bass). Each instrument setting optimizes
the pitch algorithms and adjusts the ranges of filter knobs to best complement
the selected source instrument.
Press the PRESETS button once to back-up one level to UTILITY menu.
Press the PRESETS button twice to go to top level System menu.
[PDLCAL] – Expression Pedal Calibrate (ON, OFF)
Press the HOTKNOB button to select. Select OFF to disable automatic Expression
Pedal calibration.
Press the PRESETS button once to back-up one level to UTILITY menu.
Press the PRESETS button twice to go to top level System menu.
[EXPTIP] – Select function of Auxiliary Switch Tip [SWITCH, PEDAL]
Press the HOTKNOB button to select. The rear panel 1/4 inch stereo phone jack
labeled, “EXP” can be connected to an expression pedal or up to three auxiliary
switches. The function of the “tip” must be selected to respond to an expression
pedal or aux switch. The default function is [PEDAL].
Press the PRESETS button once to back-up one level to UTILITY menu.
Press the PRESETS button twice to go to top level System menu.
[SER*] – Serial Number (H9-xxxxx)
Press the HOTKNOB button to display your H9’s unique serial number. The five
digit number will scroll by. You’ll need to know this number to request support
and to download software updates.
Press the PRESETS button once to back-up one level to UTILITY menu.
Press the PRESETS button twice to go to top level System menu.
[SW VER] - Software Version
Press the HOTKNOB button to display your H9’s software version.
Press the PRESETS button once to back-up one level to UTILITY menu.
Press the PRESETS button twice to go to top level System menu.