User Manual

H9 User Guide System Mode

[TUNER] – Tuner Settings

Press the HOTKNOB button to select. Turn the Knob to select either [AUDIO] or

[CALBRT].

[AUDIO] – Choose audio function when Tuner is active (BYPASS, MUTE)

Press the HOTKNOB button to select. Turn the Encoder to choose BYPASS or

MUTE. When BYPASS is selected, whenever the H9’s tuner is enabled, the audio

input is connected to audio out. When MUTE is selected, audio is muted when

tuning.

Press the PRESETS button once to back-up one level to TUNER menu.

Press the PRESETS button twice to go to top level System menu.

[CALBRT] – Calibrate Tuner’s Reference Frequency (440 Hz)

Press the HOTKNOB button to select. Turn the Encoder to adjust the Tuner’s

reference frequency from 420 Hz to 460 Hz. 440 Hz standard is the default. This

value will also establish the ‘A’ tuning for the pitch effects.

Press the PRESETS button once to back-up one level to TUNER menu.

Press the PRESETS button twice to go to top level System menu.

[UTILS] - Utility Functions

After entering System mode, turn the Knob to select [UTILS], then press the

HOTKNOB to enter the Utility functions settings mode. Turn the Knob to scroll

through the Utility functions.

[PRESET] – Select the range of Active Preset (L01 - H99)

Press the HOTKNOB button to select. Press the Left Footswitch and turn Knob to

set the lower limit and the Right Footswitch and turn Knob to set the higher limit.

The default is [01--99]. Only Active Presets can be loaded by Footswitch and

PRESETS button and Knob on the stompbox. All Presets may still be loaded using

MIDI program change.

Press the PRESETS button once to back-up one level to UTILITY menu.

Press the PRESETS button twice to go to top level System menu.