User Manual

H9 User Guide System Mode

Press the PRESETS button once to back-up one level to MIDI menu.

Press the PRESETS button twice to go to top level System menu.

[SYS ID] – MIDI SysEx ID (ID 1-ID 16)

Press the HOTKNOB button to select. Turn the Knob to choose the MIDI SysEx ID

for Backup and Restore of Presets and System settings.

Press the PRESETS button once to back-up one level to MIDI menu.

Press the PRESETS button twice to go to top level System menu.

[OUTPUT] – MIDI Transmit/Thru Select (XMT, THRU)

Press the HOTKNOB button to select. Turn the Knob to select either MIDI out to

either transmit (XMT) H9 MIDI data or pass incoming MIDI data thru the H9.

Note: if OUTPUT is set to THRU, none of the H9’s MIDI Transmit functions will be

operative.

Press the PRESETS button once to back-up one level to MIDI menu.

Press the PRESETS button twice to go to top level System menu.

[DUMP] – Dump Select (ALL, ACTIVE, PRESET, SYSTEM)

Press the HOTKNOB button to select. Turn the Knob to choose what is being

backed up via SysEx Dump or Dump Request.

ALL = All 99 Presets and System settings are dumped.

ACTIVE = Only the currently loaded Preset is dumped.

PRESET = All 99 Presets are dumped.

SYSTEM = All System Mode settings are dumped.

Press the PRESETS button once to back-up one level to MIDI menu.

Press the PRESETS button twice to go to top level System menu.

[CLK IN] – MIDI Input Clock Enable (ON, OFF)

Press the HOTKNOB button to select. Turn the Knob to set MIDI Clock Receive ON

or OFF. If ON, MIDI Clock is used as a Tempo source.

Press the PRESETS button once to back-up one level to MIDI menu.

Press the PRESETS button twice to go to top level System menu.