User Manual

H9 User Guide System Mode

Press the Left and Right Footswitches to toggle between Source and Destination

to make as many assignments as you wish. The default settings for Aux Switch

control are as follows:

[BYP.TIP]

[PR+.T+R]

[PR-.RNG]

Note that the other Control Destinations ([PSW], [TAP], [KB0]-[KB9], and [TUN]) are

unassigned as indicated by [---].

When done, Press the PRESETS button to go to top level System menu.

[MIDI] - MIDI Functions

After entering System mode, turn the Knob to select [MIDI], and then press the

HOTKNOB button to enter the MIDI functions settings mode.

Turn the Knob to scroll through the MIDI functions including MIDI Program maps,

MIDI channel, MIDI Data Dumps, etc.

[RCV CH] – Set the MIDI Receive Channel (OFF, OMNI, 1-16)

Press the HOTKNOB button to select. Turn the Knob to set the MIDI Receive

Channel option. You can select a MIDI Channel number [1] –[16], turn OFF MIDI

receive or choose OMNI to receive on all MIDI channels.

Press the PRESETS button once to back-up one level to MIDI menu.

Press the PRESETS button twice to go to top level System menu.

[XMT CH] – Set the MIDI Transmit Channel (1, 2-16)

Press the HOTKNOB button to select. Turn the Knob to set the MIDI Transmit

Channel.

Press the PRESETS button once to back-up one level to MIDI menu.

Press the PRESETS button twice to go to top level System menu.

[RCV.CTL] - Receive Continuous Control Message

[RCV.CTL] allows external MIDI Continuous Control messages to be used as

assignable controls for the HOTKNOB (any combination of parameters) and

system control. The idea is to first select the H9 parameter or function that you

want to externally control (Mix for example) and then select either MIDI Bend or

the MIDI CC with which you want to control it.