User Manual

H9 User Guide System Mode

System Menu Tree

The system mode is divided into seven categories [BLUE], [BYPASS], [AUX SW],

[MIDI], [GLOBAL], [TUNER] and [UTILS] which are the top-level menu items that

appear when entering system mode. In the following, factory default settings are

indicated in (bold).

[BLUE] – Bluetooth Settings

After entering System Mode, turn the Knob to select [BLUE] and then press the

HOTKNOB button to enter Bluetooth Settings Mode. Turn the Knob to select either

[PIN] or [NAME].

[PIN] – Number for Pairing with your iOS Device

Press the HOTKNOB button to display the four digit Bluetooth PIN code. The PIN

is set to the last four digits of your H9’s serial number.

Press the PRESETS button once to back-up one level to BLUE menu.

Press the PRESETS button twice to go to top level System menu.

[NAME] – Your H9’s Bluetooth Name (H9-xxxx)

This is your H9’s “Bluetooth” name that will be displayed on your iOS device. The

default name is H9 followed by your H9’s serial number. Note that the NAME is

truncated – press the Right Footswitch to traverse the full name.

You can rename your H9. To do so:

1) Press the Right Footswitch and the first character of the will flash.

Turning the Knob will change this character. Names can have up to 16

characters. The available character set is '0-9', 'A-Z'.

2) Use the Left and Right Footswitches to traverse the display, selecting the

character to be edited by the Knob. (The active character for editing is

always flashing.) Repeated pressing of the Right or Left Footswitch will

traverse through the name, one character at a time, flashing the selected

character. Press and hold Left Footswitch to DELETE the currently

flashing character.

3) Press and hold the Right Footswitch to INSERT a character before the

currently flashing character.