User Manual

H9 User Guide System Mode

System Mode

System Mode is used for settings that affect the overall system such as the

Bypass, Aux Switch, MIDI, etc.

To Enter/Exit System Mode

Press and hold the HOTKNOB button and Right Footswitch simultaneously for a

few seconds to enter and exit the System Mode. Upon entering System Mode,

you’re at the top-level menu selection. The Left and Right Footswitch LEDs will

flash RED continuously to remind you that you’re in this special mode. The Edited

LED is OFF in System Mode.

At the top-level, turn the Knob to scroll through the choices: [BLUE], [BYPASS],

[AUX SW], [MIDI], [GLOBAL], [TUNER] and [UTILS]. Press the HOTKNOB button to

select one of these choices.

System Mode Navigation

General navigation of the System Mode menus/parameters is as follows:

1) Push the HOTKNOB button to step down into the menu tree.

2) Turn the Knob to scroll thru menu items or parameter selections or

values.

3) Press the PRESETS button to step up the menu tree to upper level menu

options.

For sub menus with two fields, press the Left or Right Footswitch to select the

active field. The Footswitch LED corresponding to the active field will be lit.

Hint: While the PRESETS button can always be used to step up the menu tree, for

menu items that are only one level deep, pressing the HOTKNOB button a second

time will also step up to the top level.