User Manual

H9 User Guide Tuner
23
Tuner
Press and hold the Left and Right Footswitches for 2 seconds to enable the Tuner.
When you play a note the LightRing indicates the degree to which you’re in or out
of tune while the display indicates the note. With the LightRing lit at twelve
o’clock you’re in tune. Press either Footswitch to exit.
When the Tuner is enabled the H9’s audio output is normally muted – this is the
default setting. If instead you prefer you can set the H9 to [BYPASS] directly
connecting the H9’s input to its output. Note that the default reference frequency
for the Tuner is “A” 440 Hz.
Instructions for adjusting the reference frequency and for selecting Mute/Bypass
can be found in the System Mode section of this User Guide.