User Manual

H9 User Guide Presets, Algorithms, Parameters
21
Global Mix
Nearly all of the algorithms feature a mix control which sets the relative levels of
the input signal (dry) and the Effect (wet). The mix parameter setting is saved with
each Preset. Often however, it is useful to have the mix setting remain uniform as
you change Presets. To do this, use the System GLOBAL MIX command. When
GLOBAL MIX is ON, the Mix setting saved with the Preset is ignored and the
current Mix setting is used for all Presets.
Turning GLOBAL MIX ON or OFF. The factory default is OFF.
1) Press and hold the HOTKNOB button and Right Footswitch
simultaneously for a few seconds to enter System Mode.
2) Turn the Knob until [GLOBAL] is displayed.
3) Momentarily press the HOTKNOB button.
4) Turn the Knob until [MIX] is displayed.
5) Momentarily press the HOTKNOB button.
6) Turn the Knob to select [ON] or [OFF].
7) Press and hold the HOTKNOB button and Right Footswitch
simultaneously for a few seconds to exit System Mode.