User Manual

H9 User Guide Presets, Algorithms, Parameters
17
radio buttons or pressing and holding the Right Footswitch to enable tapping, will
disable cueing.
Select/Load Instantly
You can instantly select Presets using the Knob. First press the PRESETS button.
Turning the Knob will scroll through the available Presets and instantly load a
Preset when you stop scrolling. As you turn the Knob the Preset number and the
1
st
4 characters of the Preset Name are displayed. When you stop scrolling, the
Preset loads and the full Preset Name scrolls across the display.
Adjusting Preset Parameters
A Preset’s parameter values can be adjusted by selecting the X, Y, or Z button.
Whenever one of these buttons is pressed, the button lights up and the display
shows the parameter’s name. The LightRing indicates the relative setting of the
parameter. Press the Knob to display the parameter’s value without changing it.
Turn the Knob to change the parameter’s value.
Additional details on adjusting parameters can be found in the “Algorithms and
their Parameters” section of this User Guide.
Edited Preset Indication
Whenever a Preset’s parameter values are changed, the far right decimal point of
the six character display is lit to indicate that the parameter values are different
from the Preset’s values. Parameters can be changed by:
a) changing a parameter value,
b) changing an X, Y, or Z button’s top-level parameter,
c) moving the Expression Pedal or HOTKNOB,
d) tapping a new tempo,
e) receiving a MIDI command.
Note: Edited Presets are lost if they are not saved before loading another Preset.