User Manual

H9 User Guide Presets, Algorithms, Parameters
16
Presets, Algorithms, Parameters
The H9’s Presets are based on a set of audio processing algorithms. An algorithm
is the underlying structure of the effect that the Preset is built upon. Please refer
to our on-line documentation for descriptions of the H9’s Algorithms &
Parameters.
Presets
The following attributes are saved with Presets and recalled when Presets are
loaded:
1) Parameter values
2) X, Y, Z button top-level parameter*
3) Tempo/Tap value**
4) Tempo On/Off status
5) Expression Pedal mapping
6) HOTKNOB programming
7) Output level
*Note: The state of the X, Y, and Z buttons is saved with the Preset. For example,
if the X button was set to control “Feedback” then, when the Preset is recalled, the
X Knob will be set to control “Feedback.”
** Note: The H9 can be set up to change the Tempo value when a Preset is loaded
or to ignore the value saved with the Preset. While Tempo values are always saved
with the Preset, you may prefer to have your current Tempo stay the same as you
switch from Preset to Preset. With GLOBAL TEMPO ON, the Tempo saved with the
Preset is ignored and the current Tempo value is used. Global Tempo ON/OFF is
described later in this User Guide.
Selecting Presets
Presets are selected by using the Footswitches or by turning the Knob. When a
Preset is loaded the full Preset Name will scroll once across the display.
Select/Cue/Load
To select a Preset using the Footswitches, press the Right Footswitch to increment
or decrement through the presets until the desired Preset is cued. To change the
direction, up/down, press the Knob. Press the Left Footswitch to load the Preset.
When a Preset is ‘cued’ the Preset Number flashes to remind you that it is not yet
active. The Preset remains cued until you take some action. Pressing any of the