User Manual

H9 User Guide The Basics

The X, Y, and Z buttons behave independently so any or all can be in EXPERT or

NORMAL mode. For example, you may want the X button to always control MIX,

while using the Y and Z to each have access to multiple parameters.

HOTKNOB button

HOTKNOB is a custom top-level parameter patch that allows the Knob to control

any combination of the parameters simultaneously. When the HOTKNOB button is

pressed the Knob becomes, in effect, an on-board Expression Pedal. The

HOTKNOB (and Expression Pedal) are used by all of the factory-supplied Presets.

Programming the HOTKNOB is described later in this User Guide.

PRESETS Button

To select and load a Preset press the PRESETS button and turn the Knob stopping

when the desired Preset Name appears. Presets automatically load when using the

Knob. When a Preset is loaded the full Preset Name will scroll once across the

display. Pressing and holding the PRESETS button, enables the Save Preset Mode.

Saving presets is described later in this User Guide.

TIP: Pressing the PRESETS button when it is already lit will show the name of the

current Algorithm.