Specifications

60
The first four channels of MAIN outputs (those
connected to the default Analog outputs) get their signals
from DSP B channels 1 to 4.
The second four channels of Main out (those connected to
the default Digital outputs) get their signals from DSP B
channels 5 to 8.
The ADAT outputs are directly connected to AES inputs 11 to 18.
AES outputs 11 to 17 are fed from the ADAT inputs.
FireWire1 outputs are not connected.
FireWire2 outputs are fed from Main out .
Further Input and Output options
There are a number of alternative inputs and outputs, which may take the place of the
normal ones. For example, all members of the H8000 family have an S/P DIF input on
an RCA connector that may be used in place of AES/EBU 1&2. These options may be
controlled from the Input/Output Options page under inputs on the SETUP menu.
Just hit the
inputs soft key until you get there.
The screen below is for the H8000FW but a similar page appears on all members of the
family.