Specifications

50
The
MAIN Outputs block may be fed from any of the outputs of either DSP or from
the MAIN Inputs block. Each channel has two inputs - signals connected to then will be
added together (mixed). Be aware that if two peak level signals are added in this way, it
can overload the outputs.
 See Configuring the MAIN Outputs
The first four channels of MAIN Outputs feeds four analog outputs, as shown. Similarly,
the second four channels feed four AES/EBU outputs. The
MAIN Outputs block may
also feed other outputs, to be discussed later.
 See Connecting to the H8000FW’s outputs
The example above shows DSP A being fed from the MAIN Inputs block, and its
outputs feeding MAIN Outputs . DSP B is shown as not used.