Specifications

See? Alphabetical order! Now, pressing the left

or right CURSOR keys jumps through the

alphabet. Pressing the right CURSOR key here

would cause us to jump to Reverb programs

that begin with "C".

The "Speed" indicator (a little

) indicates that

this program can be loaded and run for use at

88.2kHz and 96kHz sampling rates. In the

screen shown to the right, only Basilica could

not be run at higher sampling rates because it does not have the "Speed" indicator.

 See Sampling Rates on page 79 for more information.

The "monolithic" indicator (a Roman Numeral

II) indicates that this program uses the

processing resources of both DSP A and DSP B.

In the screen shown to the right, the program

Dtune_VDly_Hall_EQ is a monolithic program. Note the "II" next to its name. Think of

monolithic programs as loading into DSP A and causing DSP B to disappear.

Any "non-monolithic" program that you SELECT will load into the currently displayed

DSP (referred to by the letter in the upper left-hand corner of the screen). If you want

to load the program into the DSP not currently displayed, press the PROCESSOR A/B key.

Doing so will toggle the display to the other DSP.

Parameters

Simply loading programs probably won’t prove

satisfying for too long; you’ll want to mess with

the parameters on the programs you load. This

is accomplished in the PARAMETER area. Very