Specifications

38
Let’s go through an example. Say you want to
use a delay-based program. First, go to the
Criteria menu page in the PROGRAM area and
set Search By to Effect and Sort By to
Number.
Then, go to the list menu page. The < - - and - - > SOFT KEYS search through
programs as defined by Search By on the Criteria menu page. Since we opted to
Search By Effects, the < - - and - - > SOFT KEYS search through all of the available
programs to find those that contain certain types of Effects:
 Samplers (S) Pitch shifters (P)
 Reverbs (R) Delays (D)
 Modulations (M) Complex Effects (C)
 Equalizers or Filters (E) dYnamics (Y)
You’ll know which set of effects is currently
displayed by the information provided in the
upper right-hand corner of the screen. In this
example, the set contains 35 programs that use
Dynamics (compressors, gates, etc.). Notice that all of the programs shown have a "Y"
icon to the right of their name, indicating that they perform dynamics processing, among
other things.
Press the < - - or - - > SOFT KEYS until you
see the set of programs that contain delays.
Notice that all of the programs shown have a
"
D" icon to the right of their name, indicating
that they perform delay processing, among other things.
Now, you can use the left and right CURSOR
keys (not the SOFT KEYS we’ve been discussing!)
to jump through the programs by "century."
Pressing the right
CURSOR key from the screen
above jumps from program numbers that start with 2xx to programs that start with 3xx, as
shown here! Pressing it again would jump to
programs with numbers 4xx. You will recall that
the first one or two digits form the bank
number, so using these keys will jump from
bank to bank.