Specifications

15
SETUP Storage Press and hold down the
PROGRAM key again for one second to access this
area. The LED next to the PROGRAM key blinks.
Inside you’ll find utilities for loading, saving, or
deleting "setup configurations."
 See Storing and Loading Setups on page 137.
 To change the "hold time," see Miscellaneous Setup Options
on page 138.
USERGROUPS Press and hold down the PROGRAM key again for one second to
access this area. The LED next to the PROGRAM key blinks. Inside you’ll find utilities
for renaming or deleting "User Groups."
 See Using User Groups to Organize Useful Programs on page 44.
PARAMETER Press the PARAMETER key to
access this area. Here you’ll find the parameters for
the currently loaded programs. Continue pressing the
PARAMETER key to access additional SOFT KEYS (if
available)
.
 See Parameters on page 131.
The PARAMETER key also gives access to the built-in
Patch Editor. Press and hold down the PARAMETER
key for one second to access this area. The LED next
to the PARAMETER key blinks. The Patch Editor
allows you to create your own effects from scratch or to customize programs that already
exist.
 See the separate Programmer’s Manual for more information on the Patch Editor.
 To change the "hold time," see Miscellaneous Setup Options
on page 138.
LEVELS Press the LEVELS key to access this area.
Inside you’ll find level and Level Meter parameters.
 See Controlling Levels on page 72.
SETUP Press the SETUP key to access this global,
"catch-all" area. Inside you’ll find routing parameters,
digital setup controls, global MIDI setup, global
"external" setup, display contrast/brightness, the pedal
jacks’ setup, dump data utilities, next/previous program advance, and miscellaneous
service utilities. Press the
SETUP key more than once to access additional SOFT KEYS.