Specifications

14
Getting Around and Altering Parameters
Adjusting the Brightness and Contrast of the Display
Before we begin to describe the H8000FW’s
interface, we ought to make sure you can see the
display! To adjust the contrast of the display, press
the SETUP key four times, then press the leftmost SOFT KEY under the display menu.
Turn the KNOB to adjust contrast or press the DOWN CURSOR key and turn the KNOB to
adjust brightness.
The "Areas" of the H8000FW
The H8000FW’s interface is divided into several functional "areas." You access each area
by pressing its key. You’ll know which area you’re in because the LED next to its key
illuminates (except for the BYPASS area, but that one’s obvious). The areas are:
PROGRAM Press the PROGRAM key to access this
area. Inside you’ll find utilities for sorting programs,
loading programs, saving programs, deleting programs,
and grouping programs of your choosing into "user
groups." Press the PROGRAM key to access additional SOFT KEYS.
 See Program Load, Save, Delete, Etc. on page 115.
ROUTING Storage Press and hold down the
PROGRAM key for one second to access this area.
The LED next to the PROGRAM key blinks. Here
you’ll find utilities for loading, saving, or deleting
"routing configurations."
 See Signal Flow Example on page 64.
 To change the "hold time," see Miscellaneous Setup Options
on page 138.