Specifications

185
These actions establish the H8000FW’s internal routing configuration.. The number 20
routing preset on the H8000FW, Firewire 8Track AB, supports 8-track input and
output: channels 1-4 are routed to and from the H8000FW’s machine A, channels 5-8 are
routed to and from its machine B.
Configuring Logic Pro for H8000FW Input and Output
To permit Logic Pro to send and receive audio from the H8000FW, you must change to
audio its settings to recognize the aggregate audio device we just created.
 Open Logic Pro, and from its Audio menu, select Audio Hardware & Drivers.
The following screen displays:
 From the Driver drop-down list, select Aggregate Device (as shown above).
You now will be prompted to restart Logic Pro for the new settings to take effect.