Specifications

inputs menu page in the SETUP area. To route signals to the ADAT output, select them

at the outputs menu page in the SETUP area.

These jacks may also be used as optical-type S/P

DIF connectors. The optical input may be

assigned to one pair of AES11/18, which will

disable that pair as AES inputs. If AES11/12 is

selected as an optical input it cannot also be selected as an electrical S/P DIF input so the

DIN11/12 control is disabled.

The optical output may be fed from any one pair

from AES11/18. Clearly, if either of these

connectors is used for S/P DIF the

corresponding ADAT signals will be disabled.

k) MIDI

MIDI is used for instrument-to-instrument digital communications. The H8000FW sends

and receives Eventide system exclusive messages that allow a MIDI sequencer or foot pedal

(among other things) to remote control the H8000FW. In addition, the H8000FW may

respond to standard MIDI messages and may output standard MIDI messages. The

H8000FW has three MIDI ports:

IN - the H8000FW accepts (and processes) MIDI messages received at the MIDI In

port. The connector is "7 pin" and can also send MIDI messages to a suitably equipped

system. A normal "3 pin" MIDI cable can be used as a standard MIDI input.

OUT - the H8000FW sends MIDI messages to other devices via the Out port. MIDI messages

are also sent out the serial port if they are "enabled."

THRU - Any MIDI information received at the MIDI In port is echoed directly to the

MIDI Thru port regardless of the H8000FW’s configuration (as long as the H8000FW is

powered up) .

With the Memory Card removed, the BUSY LED on the front panel illuminates whenever a MIDI message is received at the

MIDI In port. Note: If the serial port is "enabled" and MIDI is "enabled," a command received over either the serial port or

the MIDI In port causes the port not receiving the command to be ignored until the command is complete.

 See MIDI Setup on page 93.

l) EVE/NET

RJ45 jack for use with Eve/Net remote controllers. See the Eventide Web Site

http://www.eventide.com for more information on Eve/Net. Do not connect this jack

to an Ethernet network

or electrical damage may result.