Specifications

Then use the left and right CURSOR keys to skip

through the programs by their first letter to the

programs that begin with "i". Then use the up

and down CURSOR keys to find the program

Interface Modules and press the SELECT key.

This program was designed for folks who are

interested in creating their own programs (see

the separate programming manual). As such,

knob doesn’t do anything useful, but it will serve

us well for the purposes of this demonstration.

With the cursor highlighting knob on the

inputs menu page in the LEVELS area, press

and hold the SELECT key until the external

modulation menu page shown to the right

appears. The "SELECT key trick" is how you "remote control" any parameter in the

H8000FW and is discussed in depth on page 111. For now, we have a convenient

method for getting you to an external modulation menu page. You will also find

"explicit" external modulation menu pages in the PARAMETER area (ones that don’t

require you to press SELECT to see them!) .

 See Remote Controlling Parameters on page 111 if you’re really curious.