User's Manual

Simply press DONE to step to the CONFIG screen.

NOTE

: The ENTER CONFIG/PASSWORD screen is bypassed when the unit security level is

LOW.

CONFIG Screen

- Leads to Clock and System Configuration

From this screen, you can configure the clock (setting the time and time source), and/or

change the settings of the parameters listed above.

Time/Clock Configuration

CLOCK CONFIGURATION Screen

- Leads to screens for setting date and time and

the time source

Press the CLOCK soft key to access this screen. Here you can change the date and

time and/or the source for keeping time in the DIR911. The DIR911 can synchronize

externally to NENA Standard Time Code Formats 0, 1, or 2.

SET THE TIME Screen

- Set the date and time

Press the SET TIME soft key to display this screen. Here you can set the date and time

for the DIR911. The CURSOR key moves activity from one quantity to the next; the

INCREASE and DECREASE keys affect the value of the display. When finished, the

DIR911 will prompt you to “SET” or “CANCEL” the new time. This prompt prevents

accidental re-setting of the internal timer.

From the CLOCK CONFIGURATION Screen, press the SOURCE soft key to display

this next screen.

Please enter your password:

00000

CURSOR DECREASE INCREASE DONE

Configuring the DIR911

CLOCK SYSTEM DONE

DIR911 Clock Configuration

SET TIME SOURCE DONE

16-May-00 13:52:12

CURSOR DECREASE INCREASE DONE