User Manual

Auto Play Seq (Auto = Clock On or external Clock/Trigger source)
With internal clock On or external clock patched to Clock Input jack, once you record
a Tone Row sequence, Misha will automatically start playback at the current tempo.
- Press Button to pause Tone Row sequence and jump out of Auto Play
- Press again to jump back into the Auto Play Sequence
- Press to stop Tone Row sequence, press again to record new sequence.
You can edit/modify the Sequences in various ways:
Play Option (upper left corner of screen)
- Rotate the Key Knob to scroll through different Play Options and hear the Tone Row played in different ways:
Prime (forwards), Retro (backwards), Random, Pendulum, Transpose Up and Down, Translate Up and Down
- Holding Key Knob down and rotating it allows Play Option to happen on release after it is selected
Interval Button Option (upper right corner of screen)
The Interval Button Option defines what the Interval Buttons do while playing back an automated Tone Row.
- Rotate Scale Knob to select an Interval Button Option: Interval, Clock Div, Transpose, Translate, Octave, Chord
- Press/hold Scale Knob for Last, Reset or Random of the selected Interval Option
- Press/hold and rotating Scale Knob scrolls through parameter values for the selected option
- Press an Interval Button to select 1 of 9 parameter values for the selected option
- Interval Button Option parameter value is shown in the lower right corner of the screen
Other Buttons in Auto Play to modify the note sequence
- Press Button to start Tone Row from the beginning (1st note in sequence)
- Hold Key Knob down and press to toggle Tone Row between Normal and Inverted
- Press User 3/4 (-/+) Button to shorten/lengthen the note duration: SHORT, MED, LONG
- Press and hold User 3/4 (-/+) Button in combination with any Interval Button, User 1/2,
, Key, or Scale Button, to erase/add events to your tone row
C
D
E
FG
A
B
C
RESTART
PRIME TRANSLATE
MED
0
C
D
E
FG
A
B
C
REST-
RANDOM
+
TRIPLET
Auto Play Sequencer
Tone Row
Misha can record and play a Tone Row sequence: a note pattern in the chosen key and scale which won’t repeat
a note until all the notes in the scale are used up. This Tone Row sequence can be played back manually or in
an automated fashion driven by clock or ext trigger.
Record/Play Manual Sequence (Manual = Clock Off or Paused)
- Choose Key and Scale to record a Tone Row sequence
- Hit the button and Misha will go into Record mode (lights red)
- Press Interval Buttons to record a Tone Row sequence
- Hit button (lights green) to finish recording before using up all the notes in the scale
- Or Misha will automatically go into Play mode (lights green) when all the notes in the scale are used up
- Once in Play mode, press Interval Buttons to walk through/play the Tone Row sequence manually
- Button resets the Tone Row (1st note in sequence)
- You can also change Key and Scale to play back the Tone Row with new settings
- To get out of Manual Play Sequence, press button
Clock Menu
Press Shift Button to page to Clock Menu.
- Rotating Key Knob turns internal clock On/Off
- Rotating Scale Knob increments/decrements internal clock BPM by 1 BPM
- Pressing and rotating Scale Knob provides coarse adjustment by 5 BPM
- Tapping the Button allows real-time tap tempo setting
C
D
E
FG
A
B
C
TAP
Clk: On BPM: 120
Clock / Tone Row
Note Range Menu
From the Play Menu, press Shift Button once to access the Note Range Menu, which
allows optimizing note range for Key/Scale and instrument/sound with Misha.
- Key Knob sets low note limit
- Scale Knob sets high note limit
- Note Range can be reset to previously stored values with Button
- Note Range is saved with preset
C
D
E
FG
A
B
C
RESET
36 C2 95 B6
Play Menu
Play menu is where Misha lives for real-time performance.
- Pressing Interval and User Buttons plays musical lines in the chosen key and scale
- Bottom row indicates octave range and current octave of note
- Key Knob scrolls through musical keys as you rotate it (press/hold to load on release)
- Scale Knob scrolls through all scales as you rotate it
- Press/release Scale Knob to cycle through 4 banks (S1/S2 Factory, U1/U2 User) of 50 scales
- When a scale has modes, a small green triangle is shown in the lower right corner of the
scale name window. Press/rotate the Scale Knob to scroll through the scale modes
C
D
E
FG
A
B
C Major
C
Home Menu Navigation
Chord Menu
Press/hold Shift Button to access Misha chords. Misha currently has 9 chord options.
- Select chord 1 to 9 by pressing Interval Button -4 to +4 respectively
- Decrement or Increment through chord list by pressing User 3 (-) or User 4 (+) Buttons
- Scroll through chord list with Scale Knob and press to select the chord
- Press Button to toggle chord on/off
C
D
E
FG
A
B
C
A F
CHRD-
TRID1
TRID1
CHRD+