User Manual

www.event-lighting.com.au
4
Control Board Operation
1 – Menu: Move up one level.
2 – Up: Move up one item.
3 – Down: Move down one item.
4 – Enter: Move down one level/confirm selection.
Menu
Level 1
Level 2
Value
Information
DMX
DMX address
1-512
Set DMX address
CHAN
CH01
Use 1 channel mode
CH02
Use 2 channel mode
CH03
Use 3 channel mode
DIMMER
DIM
0-255
Manual control of Dimmer
D_F
0-255
Manual control of Dimmer-Fine
STO
0-255
Manual control of Strobe
HALOGEN
ON/OFF
CURVE
Linear
Linear dimming curve
Log
Logarithmic dimming curve
S
S dimming curve
FAN
Max
Fastest fan speed
Auto
Variable fan speed, based on thermal sensor
Silent
Theatre mode
TEMP
C.000
Current fixture temperature
RESET
YES/NO
Reset to factory default
VERSION
S109.01
Software version
Use Up and Down to select the desired item and Enter to confirm.
• When there is no DMX signal, a flashing “!” will be displayed on the screen.
• The screen will turn off if no buttons are pressed for 30 seconds.
Set DMX Address
Select “DMX” then press Enter.
Use Up and Down to set the desired DMX address from 1 to 512.
Press Enter to confirm and save.
Set DMX Channel Mode
Select “Chan” then press Enter.
Use Up and Down to set the desired DMX channel mode.
Press Enter to confirm and save.