User Manual

8
Safety-rope
Rapid locking hook
DMX-512 connection with DMX terminator
A DMX terminator helps to reduce ‘noise’ on the DMX chain, and makes the light respond to
control more accurately. It should be plugged in to the last fixture in any chain. For Terminator
connections please see below:
8. Error Messages
In the event of an error or problem within the fixture, the display will show an error message
such as “PAN-ERR”. A pan error could be caused by an obstruction to the rotation of the ball.
If this is the case, power off the unit and clear the obstruction.
With any error message, the unit should be powered off, then turned on again after a few
seconds. If the error message persists, please contact your local dealer for advice or repairs.
There are no user-serviceable parts within this product – do not attempt to open and repair
yourself. Doing so will result in any warranty being voided.
9. Rigging: